How to Make LED Lights

Despite the fact that in modern shops the range of diverse subjects of goods for every taste, still considerable popular items made with their own hands - not because they cannot buy, but because their production will bring you a lot of pleasure and experience .One of these items can be called a simple LED flashlight . You can make headlamp LED flashlight with your own hands, and then use it in the home.

You will need simple materials that are easily available in any home - a soldering iron battery "Krona" (two pieces - new and old), a resistor, two 10W high power LED chips and thin strips of tin. Also, you need a pair of scissors that can cut plate.

Take a tin plate, which will be the base of the flashlight and, and solder it to the finished metal clamp to the battery. If you do not have a collar, you can just bend his strips and then soldered to the substrate. Reinforce the "crown" in the yoke and make sure that it is held firmly and tightly.

Now take the old battery "Krona" and disassemble it. The internal battery contents you do not need - it can be thrown away. Extract the contents of the batteries small cutters, cut a third of the old batteries with sharp scissors, metal, solder, and then the remainder of the battery to the bottom of your future lantern.

Set inside the terminal board and solder it to the LEDs, taking into account the polarity. After that, take switch and solder it to the structure that it is connected to the LEDs. Glue gun or epoxy fill construction and allow complete drying of the adhesive.

To ready a flashlight in, attach the elastic band, so it can be worn on the forehead, freeing your hands for other work. BTW, you can select the LED lights (e.g. LED 10W floodlight) at Banggood for high quality and reasonable prices.