How to Connect the LED Tape

Special difficulties in the process of mounting any tape there arise problems when something goes wrong. Let us consider some basic situations, why it is necessary to connect the tape.

Initially, it would be desirable to recall the LED strip at 220 volts. It is peculiar, if the burn is at least one LED, you need to replace a meter.

When installing any lighting in the house you may find that tape is too small or has been cut too large plot, there is, when it is simply damaged. Adding a new section completely solve this situation. Learn how to install the LED strip on the ceiling. Such a method could be called optimal, it requires no special skills. It is enough to buy a special 2 pin LED connector. It can be found in any market, the special rules for choosing not.

The process of connecting LED strip does not take a lot of time, and you do not need any additional tools. The two have enough tape, scissors, and a connector for the LED strip.

• First of all you need to determine how many contacts have LED ribbon. As a rule, three of them, if the tape RGBW they can be 4. Accordingly it is necessary to select the LED connector that has 4 sockets.
• Prepare tape for this we clean it from the coating. Doing this is neat, contacts can damage easily.
• Take one strip and inserted into the socket connector, then fasten them.
• We perform the same actions with a different tape.
• Before you close the cover, make sure that polarity. All names are on tape and connectors.
• Close the lid.

Here we are with you and answer the question, how to connect LED strip without soldering process is quite simple. But it requires care.

Where Portable Rechargeable Searchlight Can Be Useful

Portable floodlight can be used in places where there is no provision for connection to the mains. The battery is able to hold as much as it will allow the lamp used. Therefore, the most durable choices are models that use LEDs.

Portable rechargeable floodlight can be mounted to a tripod, standing on any surface, installed in limbo. They often have a low weight, thanks to which a source is convenient to take with you. These LED chip lights can be used in construction. Protection of the source begins with IP65, where the first digit indicates the protection of the source against dust, and the second - moisture.

Also, a compact model can be placed in the trunk of a car. When changing a wheel, for an evening enjoying the outdoors this light unit would be the best acquisition. Charge the spotlight in several ways: from the network, through the car cigarette lighter socket and USB-port. LEDs are known for their low power consumption. Therefore, to keep the charge led spotlight will be long.

The portable super bright light can be in height from 24 to 35 cm depending on the number of led, and varies the power source. LEDs support three color temperature of white light. These values are measured in Kelvin. The higher the value, the light will be colder.

How to Choose Pools Lighting

The main requirement for lamps for swimming pools is water resistance, especially for underwater models. Their body and conductive elements must be completely sealed. In addition, lighting should be low voltage - no more than 24 V. In order not to exceed that limit, in the pools often mounted luminaires equipped with step-down transformer. But the best choice would be LED lighting.

Of great importance for lighting the pool it has a quality of light - it has to be bright, evenly distributed around the room and have a shimmering effect. It is important that at the junction of the water and the surrounding area did not arise optical contrast, which is necessary to properly distribute the lights under the water, on the surface of the walls and ceiling.

Devices for general space illumination are mainly used in public swimming pools and water sports complex. Typically, these fixtures are a group of industrial instruments, so its design is not very original. Among the main advantages of general purpose luminaires include low cost, high degree of protection against dust and moisture, and ease of installation - devices suspended from the ceiling or mounted on the wall. The main disadvantage is sufficiently high energy consumption (except for the LED lamps).

Contour lighting (e.g. remote controlled submersible LED lights) is best suited for swimming pools, where you want to issue an original interior. These devices are made of flexible fiber, performed on individual projects and are used for installation of custom lighting. Among the advantages of luminaires can distinguish economical energy consumption and durability among the minuses - a rather high cost.

Underwater lights are widely used for the installation of lighting systems in the basins of the open type. Depending on the method of installation of such devices can be embedded, overhead and attachments. Recessed LED lights are installed in the bottom or wall of the pool, false models are mounted on the walls and hanging - along the upper edge of the boards. To get the best quality underwater lights, appliances must be installed opposite one another or fastened in a staggered manner at a distance of two to three meters. Choosing underwater lights (e.g. 12V underwater LED lights) for the pool is necessary to pay attention to the material of the body and the type of lighting elements. The most common case is made of stainless steel or die-cast aluminum, and light sources are monochromatic or LEDs. It is worth noting that LED-lights - perfect for lighting pools. They are of high quality, secure and reliable, have low power consumption and long service life, do not overheat and do not emit UV rays.

LED Solar Lights for Christmas Lighting

Recently, very popular among consumers began to use LED lights are solar-powered. These lights are very practical and easy to use on suburban areas, Camping or camping. They can be made in various configurations by, small and compact prior to, and overall cumbersome.

All LED lamps can be divided into three main categories are often used by consumers:

• Street lights with storage batteries can be seen in the alleys of parks, car parks, parks and stadiums.
• Garden and park lamps are used in suburban areas and private country houses. To this kind may also include signal lights and motion sensors installed on private parking lots.
• The third type of home lighting products includes wall lamp, and the light fixtures (e.g. coloured lantern lights) installed on the balconies, loggias, verandas and gazebos.

LED lights on the batteries do not require connection to electricity. They get their energy from sunlight, which with the help of a specially established panel is converted into electrical energy. Keep in mind that after the lamp charge from sunlight during the whole day, and cannot stop working 12 hours after this time it will again need to be recharged.

LED ribbon should be placed in a bowl and combine it with a solar battery, which in turn should be connected to the battery (for a small lamp, you can use a cell phone battery or similar appliance). Next, set the lantern on the street for charging in the sun. LED lamp, powered by a solar cell is practical to use and install. It can be used at their summer cottage or outdoor recreation. It does not require connection to the mains and it is absolutely secure, surrounded by small children, which is important. BTW, you can select the LED Solar Lights at Banggood. Besides, you can easily get other LED lights (e.g. rose flower lights) there with high quality and reasonable prices.

How to Choose a Quality Bulb

Incandescent lamps are the most common source of light for residential use. For over a hundred years ago, the industry has mastered the production of such lamps. However, the global problem of energy conservation has called into question the use of incandescent lamps because of their high power consumption. Part of this power is simply a "warm air", which is a disadvantage of lamps of this type.

European countries have almost completely abandoned the production of incandescent light bulbs in favor of energy-saving lamps. However, in the former USSR, incandescent lamps are widely used due to its low cost and resistance to voltage change. In addition incandescent lamps do not contain any toxic substances and do not require special measures for their disposal. In the first place must pay attention to the size and shape of the bulb, and the terminal units. Modern lamps are available at a sufficiently compact lamp.

Dimensions are standardized lamp base. The most commonly used bulbs with E27 base, E14, E12 (e.g. E12 220V light bulb) and E10. Digital signage determines the diameter of the thread of the cap in millimeters. The letter "E" indicates that this is a threaded socket (Edison Screw). Also lamps distinguish the types of pads. Type "A" has the smallest area of contact, the type "C" – highest. Note the method of connecting the outer contact member with the cap. Spot welding (type "B") and solder (type "A" and "C") is most commonly used.

When choosing an incandescent lamp, it is necessary to pay attention to the way the bulb attachment to the cap, and fixing the filament. To connect to a glass flask with a metal cap used special postmark. In this connection it is easily visible through the flask. Poor fixation filament leads to an increase in the transition resistance at the point of contact and "burn" lamps. BTW, you can select the quality bulbs (e.g. LED B22 candle) at Banggood for high quality and reasonable prices.

GU10 Ceramic Lamp Holder

Each lamp in addition to other elements of the design is the so-called "chuck" – simply. It's a part of the lamp which is inserted or screwed threaded lamp base. There is a conventional alphanumeric system type designation of the cap, which is shared by all manufacturers of lighting equipment:

XXYYz - where XX is one or two capital letters indicating the type and subtype of the lamp cap,

YY - is a number indicating the diameter of  the connecting portion of the cap or on  the distance between the contact pins of the cap,

Z - lowercase letter indicates the number of contact plates, flexible joints or pins in the basement . 

First Latin capital letter indicates the type of cap:

- The letter B is a pin socket (bayonet)

- Letter E indicates a screw cap, also called Edison Screw

- Letter of the G - pin

- Letter P - focusing

- Letter R - plinth with recessed contact

- Letter S - soffit base

The second capital letter is a subtype of the cap, not common, mainly in the "pin base."

Last lowercase Latin letter:

- S - one contact

- D- two pins

- T - three contacts

- Of q - four pins

- P - five contacts

GU10 ceramic lamp holder is in the lamp socket.  The figures indicate in the distance between the centers of the pins and pins for more of the diameter of the circle on which the center pin. In this case, in the GU10 socket base two pins and the distance between them of 10 mm. Most often this type of lamp used in cap ceiling and accent lighting. In lamps with GU10 base, there are visible thickening at the end of the contacts, for connection to the rotary chuck.

How to Choose a Table Lamp for Student

C beginning of the school year, close attention should be paid to the working student place the organization, in particular, the lighting. From table lamp depends on many things: the impact of the work-being of the child after its completion, etc. When properly selected and installed on the child table lamp you can expect good results in the performance classes. This is explained by the fact that the eyes do not get tired at the right light, it means that the child does not overwork.

Courtesy lamp color and the ceiling are of great practical importance. Preferably, the lamp is with conical lampshade. Such a narrow base of the ceiling, and the edges - wide, so will be the maximum coverage. The color of the ceiling should not be very bright, as bright light will distract the child from work. The best color for the ceiling - green. Green shades do not distract the eye and allow the muscles to relax. Good and quiet pastel shades. What is important also material from which made the ceiling. Good plastic ceiling, but the poor quality plastic, they may start to melt when the light is on for a long time. This raises the risk of fire. It is necessary to choose a lamp from a solid, fairly thick plastic. Often, for the manufacture of lampshades lamps used metal. It is fireproof and durable. But a drawback - it is heated, so your child can get burned when he wants to fix the lamp. And also, a tricyclic LED Light on the desk would be more interesting.

Tripod lamps are well suited table lamp, having a flexible leg rigidly secured to the table. At the same time the lamp leg can be fully flexible or rotate on the hinges in three planes. Securing the lamp outside the working area can significantly increase the workspace table. When rigidly attached excluded lamp falling. Using a flexible stem lamp can illuminate any part of the table without moving the fixture. Desirably, the cover was not transparent. He will direct the flow of light on the table, not blind eyes of a child. To the light from the bulb was a little absent-minded, from the ceiling must be a reflector. BTW, you can select the Table Lamp at Banggood. Besides, you can easily get other electrical accessories (e.g. 1200mAh Li-ion battery) there with high quality and reasonable prices.

How to Choose a Spotlight to Illuminate the Yard

Current owners of country houses often choose to illuminate their yards the powerful spotlights, allowing maximum light the local area and scare off intruders. What kind of spotlight is best suited for this purpose?

There are four types of spotlights - halogen, metal halide, sodium and LED. The basis is a halogen incandescent spotlight with buffer gas added to the cylinder, which makes this product a high-temperature lighting device as its spirals working temperature can reach 3000K. Metal projectors operate based on the high-pressure discharge lamp, the burner which is metered radiating additive, adjusting the spectral characteristics of arc discharge mercury vapor. BTW, you can select the spotlights at Banggood. Besides, you can easily get other lighting (e.g. USB touch sensor) there with high quality and reasonable prices.

Metal, sodium and halogen luminaires, unlike LED spotlights (e.g. color changing led flood light) are unstable vibration. The light source in sodium floodlights are the sodium high-pressure discharge lamps. During the gas discharge glowing heat occurs in sodium vapor, which leads to a monochromatic radiation. The light source in LED spotlight consists of environmentally friendly LEDs do not contain mercury components. Experts do not recommend to buy the first got the spotlight, and the first to evaluate the work of the type of lamp, which is a priority in the selection of the lighting device.

Halogen spotlights have excellent luminous efficacy and color rendering, as well as targeted lighting certain areas of the yard. They offer high performance, made of tempered glass and operated at a high temperature without any problem. Sodium units provide a bright yellow-orange light due to the prevailing sodium light, but when illuminated give unsatisfying color reproduction. Sodium floodlights advantage is their versatility, which allows to combining the device with other light sources.

Floodlights with poor color rendition are commonly used for lighting of industrial buildings or street lighting. Metal halide units allow cool bright light and have a high color rendering / light output. They are extremely reliable due to the resistance to voltage drops, as well as protection against dust and moisture, so metal halide lamps are perfect for lighting the yard. However, the most high-quality option is LED spotlights (e.g. LED PIR spotlight), which are completely made of strong and durable high quality materials. They provide precise directional flow of light, instantly turn on and are stable even at low voltage network.

How to Connect a Wall Light

Wall lamp allows you to create a romantic and subdued lighting in the room. If you are familiar with the electricity, you can connect your own wall lamp by place not only close to the outlet, as often happens, and in accordance with your idea of comfort.

For wiring to be seen, during the repair of the walls do not forget to lay all the cables in the walls.  If the walls are covered with plaster, before all the work, wall using the gun and run wires, then cover them with a mixture of cement or plaster. It is possible to bring the wire in the plinth and pull them to the box for special slots or be integrated in the screed before laying self-leveling floor. And if you choose lights for outer wall, you can get the PIR stainless steel wall lights.

After finishing the walls begin installation of lighting. Turn off the power at the mains. On the wall mark the install location, enclosing the luminaire body. Note the location for holes. It is convenient to do was knit to the lamp with the back of the pieces of plasticine or double-sided tape.

Drill the holes using a drill with a large drill. The resulting hole, insert the plug and screw the lamp cover back with screws. Connect the lamp to the terminal wire supply, isolate and place in the box. Note that the terminals must be connected in the correct sequence: wire "grounded" to the earth terminal in the junction box, and then insulated wires - to the pads of the lamp. Screw the lid box, assemble the remaining elements of the fixture, screw in the bulb. Installing the lamp is completed. Recheck the mounting reliability and plug it in. BTW, you can select the wall lights at Banggood. Besides, you can easily get other lighting (e.g. solar pool fence cap lights) there with high quality and reasonable prices.

If you need to carry out installation of wall lamp in the bathroom or the bathroom, read the appropriate SNIP. Buy only water proof 12-volt appliances. Transformer for fixtures located outside the bathroom. In any case, switches and lights themselves must be placed no closer than 60 cm from the bath or sink.