Test Overview of LED lamp E27

Now I put on the table for the next test lamp, a 60W E27 incandescent lamp. Advance does not want to talk, though I know the test results)). Let me remind you that I have already been tested by 2 copies of the lamp 7 watt different standard performance and form-factor and the cap. Tests on them can be found by referring to the search site. The results are almost identical. According to the conclusions of these lamps I put it a solid four.

The 12W bulb was most interesting for me, because I wanted to see how it performed and that it has such than it might interest buyers. I must say that there is no accuracy in the description - the lamp is not just made of plastic. Inside is installed around the perimeter of the aluminum heat sink thickness of 1.5 mm. The rest seems clear.

Nice packaging made of plastic with prints. Conventional box of paper is no longer relevant. In any case, if the shelves I saw such a package, make sure you went in the first place for them. All it has done clearly and beautifully - on the German quality, despite the fact that the lamps are collected in China.

Hmm ... just noticed ... Energy efficiency class! If you look at the picture, the energy efficiency class is a Class "A". Either it is not accuracy or mistake, or it is done on purpose. In the box there is an instruction manual and a reminder on coated paper.

Disassemble the lamp is not much fun. It is necessary to try very much to more or less "nice" to break the lamp. The joints are filled with sealant, so you have to wield a knife or a long time, or have recourse to a faster method - hacksaw. Thus, the lamp is disassembled. And that appears to us inside. The first is a flask of opaque plastic. As with the inner and the outer side there is no roughness. Light "disappear" will not.